The outline of the cam in Figure P6.18 is to be machined in an end milling operation, using a…

The outline of the cam in Figure P6.18 is to be machined in an end milling operation, using a 12.5-mm diameter end mill with two teeth. The part is 7.5 mm thick. Write the complete APT program for this job, using a feed rate = 80 mm/min and a spindle speed = 500 rev/min. Postprocessor call statement is MACHIN/MILL, 03. Assume the rough outline for the part has been obtained in a band saw operation. Ignore clamping is-sues in the problem.

 

"Get 15% discount on your first 3 orders with us"
Use the following coupon
FIRST15

Order Now