The part outline in Figure P6.20 is to be profile milled in several passes from a rectangular…

The part outline in Figure P6.20 is to be profile milled in several passes from a rectangular slab (outline of slab shown in dashed lines), using a 25-mm diameter end mill with four teeth. The initial passes are to remove no more than 5 mm of material from the periphery of the part, and the final pass should remove no more than 2 mm to cut the outline to final shape. Write the APT geometry and motion statements for this job. The final part thickness is to be the same as the starting slab thickness, which is 10 mm, so no machining is required on the tap and bottom of the part.

"Get 15% discount on your first 3 orders with us"
Use the following coupon
FIRST15

Order Now